Dan Dugan Sound Design E Guide de l'utilisateur Page 50

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 62
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 49
Dugan Model E-3 User Guide
50
2. Reduce the maximum attenuation by setting the auto mix depth field to -10 dB.
This limits the range of downward expansion and mixes in a steady ambience.
If you use the Model CP-2 Control Panel, the last hold function is available: press
both the master override and preset buttons at once. Their LEDs blink to indicate
that last hold is on; toggle it off the same way. The last hold function keeps the last
mic on that stays above -3 dB gain for 0.5 seconds. When another mic passes the
same criteria, it becomes the last hold mic.
NOTE: The Music and Speech Systems operate independently, but the depth control is global to
both. Use different groups if necessary.
Gain Limiting
Gain Limiting reduces master gain as new mics enter the system, thus avoiding feed-
back and noise. Acoustic gain increases as each mic comes on, whether this occurs
manually, by placing that channel in
man mode, or automatically using the Music
System. Gain Limiting is the only automatic mixing function that can be active
when the channel is in man mode. Gain Limiting is controlled by the
NOM (Number-
of-Open-Mics) channel buttons and the master
NOM gain limit field (see Figure 5-15).
NOTE: Since the Model E-3 has no master audio channel, Gain Limiting reduces the gain on all
input channels for which NOM is active.
Unlike typical NOM functions on other systems, Dugan Gain Limiting doesn’t just
count how many mics are on. It sums the gains of all the channels with
NOM active
(including partially attenuated channels), compares them to the NOM gain limit
threshold, and reduces the gain appropriately. Gain Limiting works independently
for each group.
Conventional automatic mixing implementations always assume an NOM of 1. This
can be effected on the Dugan by setting the
NOM gain limit field to 1, which maximizes
gain for each mic. Activate the
NOM buttons for each channel you wish to be included
in the gain computation. The Master Gain Limiting display shows 3 dB of gain reduc-
tion when two mics are on, 6 dB of reduction with four mics on, etc.
Vue de la page 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 61 62

Commentaires sur ces manuels

Pas de commentaire