Dan Dugan Sound Design E Guide de l'utilisateur télécharger pdf (Page 15)

Dugan Model E-3 User Guide Installation and Configuration

Chapter 3: Installation and Configuration

We recommend placing the Model E-3 in a convenient place in the engineer’s line

of sight.

Figure 3-1 Model E-3 placed conveniently

Rack Mounting

All E-Series Dugan controllers are a half-rack wide, so one or two can be mounted in

a single rack space. Each unit ships with one long and one short rack ear and one

joining plate.

The rack ears for older E-Series Dugans differ slightly from the current design, but the

joining plates are the same. All E-Series Dugans can be mounted side-by-side using

the appropriate rack ear for each unit.

To mount one unit: Attach one long and one short rack ear, then mount in the rack.

To mount two units side-by-side:

1. For the left unit, remove the four screws from the right side of the top and bottom

lids.

2. Attach the top and bottom joining plates to the left unit.

3. For the right unit, remove the four screws from the left side of the top and bottom

lids.

4. Attach the top and bottom joining plates to the right unit.

5. Attach the appropriate rack ears to the left and right units.

6. Mount the pair in the rack.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

Pas de commentaire

Dan Dugan Sound Design E Guide de l'utilisateur Page 15