Dan-dugan-sound-design E Manuel d'utilisateur télécharger pdf (Page 23)

Dugan Model E User Guide Operation

Figure 4-3 During ambience with 4 mics, auto mix gain displays should hover around -6 dB

Figure 4-4 During ambience with 8 mics,

auto mix gain displays should hover around -9 dB

TIP: To eliminate unwanted noise in the mix, use the gain displays to locate the of-

fending channel and activate its mute button.

4.3 Pre-fader Insert

The Dugan Speech System works best if patched post-fader. If your console allows this,

skip this section. If you use a pre-fader insert, this section describes how to properly

mute channels and pre-listen to muted channels.

4.3.1 Muting Channels

Mics must be muted by using the Dugan’s mute buttons. Pulling a fader down on the

console will not properly mute a channel. Although that mic is no longer audible in the

mix, it still contributes to the gain computations and causes ambient noise fluctuation.

In the worst case, this could cut off a speaker.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Pas de commentaire

Dan-dugan-sound-design E Manuel d'utilisateur Page 23