Dan-dugan-sound-design E-1 Manuel d'utilisateur télécharger pdf (Page 21)

Dugan Models E-1 and E-1A User Guide Installation and Configuration

Network Reset

Hold down the channel 1 mute button to set these parameters to their default values:

*xx = last two digits of serial number, unless 00, then use 100

DHCP On

Turning DHCP on requests that the network assign an IP number to the Model E-1A,

if the network has that capability. To turn DHCP on, hold the channel 2

bypass but-

ton down.

8- or 16-Channel Mode

These commands only work if the unit is in digital mode. Move the ANALOG

–

DIGITAL

switch to the DIGITAL (down) position.

Hold down the channel 4 bypass button to select 16-channel mode.

Hold down the channel 4

mute button to select 8-channel mode.

Model E-1 Model E-1A

IP Address

192.168.1.1 192.168.1.xx*

Netmask

255.255.255.0 255.255.255.0

Gateway

192.168.1.254 192.168.1.254

DHCP

off off

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Pas de commentaire

Dan-dugan-sound-design E-1 Manuel d'utilisateur Page 21