Dan Dugan Sound Design E Guide de l'utilisateur télécharger pdf (Page 29)

Dugan-MY16 User Guide The Dugan Control Panel

Typical Operation

This section creates a setup that will work for most applications.

1. Activate the auto mode buttons for all live mic channels.

2. Activate the mute buttons for all unused channels.

Figure 3-10 Typical operation

3. Activate the preset button next to the active mode button on each channel.

This causes that mode to be selected when the system restarts.

4. Initially, set the mixer’s faders to unity gain.

5. Speak into each mic normally at the desired distance from the mic. Increase the mix-

er’s input gain to just below clipping for best automatic mixing performance.

The input gain to the Dugan-MY16 should be high enough keep the level LED lit

green during silences.

If the input gain controls are set too low, the inputs drop below the minimum op-

erating level, and the smooth ambience is disrupted.

6. Adjust each live mic channel’s weight setting until the fluctuating ambient noise

registers approximately equally on all auto mix gain meters.

Note that raising one channel’s weight setting causes its auto mix gain to rise and

the others to fall. With balanced weight settings, all mics have equal access to the

system gain.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Dan Dugan Sound Design E Guide de l'utilisateur Page 29